Permalink 04/28

Turmeric Powder Making Machine Video

Category: Blog

Turmeric and Chili Powder Making Machine Manufacturers from Serena Ting on Vimeo.

Above is the video of the turmeric powder making machine work. The powder grinding machine is not only suitable for spices, it is also applicable to any fibrous, high toughness, material with high hardness or a certain moisture content; for pollen or other spore plants that require breaking the material of the cell wall, its The grinding rate can reach 95%. Water, alcohol, or other liquids can be added for wet comminution, or gas can be added for protective comminution. 100% crushing rate, almost no loss.

The turmeric powder making machine has many advantages. The stainless steel material used in the food industry meets the requirements of GMP. The production process is completely closed, and there is no dust overflow and no loss of material. The grinding temperature is low. The temperature of the powder produced by the continuous cooling system will not exceed 50 degrees without any cooling system. For customers with special requirements, we can configure the cryogenic system, with a minimum temperature of 35 degrees below zero.

Turmeric powder grinding machine maintenance:

1. check each component firmly before use.

2. change the screen, in washing the powder grinding machine should pay attention to avoid water into the motor, electrical and bearing, so as to avoid the impact of life, at any time to keep the cleaners clean and sanitary.

3. in order to extend the service life of bearings, lubricating grease should be added in time, and 7019-1 lithium grease should be used for lubrication.

4. the whole machine is overhauled once every half year. Caution: no metal, strong and high viscosity materials must be broken.

Contact information:

Skype: serenayan666

Email: serena@machinehall.com

Whatsapp/Mobile: +8618595717505