Peanut Peeling Equipment Storage NotesCategory: Blog
1. In the use of peanut peeling equipment, first of all should check whether the fasteners are tightened, the rotating part is flexible, each bearing whether there is lubricating oil, peeling machine is placed smoothly. In order to ensure the safety of the operator, it is also necessary to take the earth protection of the motor shell (the motor shell is connected reliably with the grounding wire by wire).
2. Power before the application of peanut peeling machine will be transferred to several laps, if there is impact sound, we should find out the cause, and then electrify.
3. You should be based on the size of peanut kernels, choose the appropriate screen.
4. After power on, you should try to operate first, and pay attention to whether the rotor is turned correctly. When the motor is started, the rotor shall be turned in accordance with the direction indicated on the tool. Idling for a few minutes to see if there is any abnormal sound, the operation is normal and smooth, before the peanut can be quantitative, uniform and continuous into the hopper.
5. When peeling, peanut feeding should be uniform, appropriate amount, absolutely not allowed to have iron filings, stones and other debris mixed, in case of breaking peanut kernels or cause mechanical accidents. When the peanut kernel is covered with the sieve surface, the outlet switch can be opened.
6. Peanut peeling machine after use, stored before the machine should be cleaned the dust, dirt and mechanical appearance of internal residual grain and other debris, and then use the diesel engine bearing cleaning parts, dried butter, the painted parts to be re coated paint, paint dry, machine cover, storage a dry warehouse. To remove the belt hanging in the sun is not the indoor wall.