How to clean peanut machinery parts?

When peanut machinery is used for peanut processing, in addition to keeping the machine itself clean, maintaining the cleanliness of the peanut machine parts is very good for the normal operation of the machine, but different dirt is really difficult to handle when it comes to peanuts. How do you use the personnel to clean the accessories?

How to clean peanut machinery parts:

1. Scale removal method: When removing silicate-based scale, add 2%-3% caustic soda aqueous solution to the cooling system. Wait for 1-2 days after the standby vehicle runs. Rinse with clean water. Repeat Finally, clean the cooling system thoroughly with clean water.

2. Oil removal method: the part of the surface of animal and vegetable oils and mineral oil removal, can be used to add a small amount of emulsifier solid re-germination solution, after heating and cleaning. If you use pressure spray, the effect is better. After cleaning, spray with heated clean water to rinse away the alkali solution remaining on the surface of the parts.

3. Carbon deposition removal method: metal brush, blade and other tools can be used to eradicate carbon deposition. However, this method is easy to scratch the surface of parts, so remove the carbon deposits on the precision parts should be removed with a wooden or bamboo spatula, and can also be rubbed back and forth on the cork board. After mechanical cleaning of the part's coke, it must be carefully cleaned with engine oil.
 

Peanut machinery as a tool for peanut butter production and processing, with the extension of the use of normal wear and tear, and even lead to a decline in performance, and ultimately hinder the normal use of machinery. Therefore, it is necessary to strengthen the cleaning and maintenance of its components in order to effectively reduce mechanical wear, ensure that the machinery has a good technical state, and can be durable.